EN 10216-2 P235GH Manufacturers in Iraq

Searching for EN 10216-2 P235GH Steel Pipe in Iraq

Specifications in Iraq of EN 10216-2 P235GH Steel Pipe

At Tricon Steel & Alloys in Iraq, we provide premium EN 10216-2 P235GH alloy steel pipes designed for high-temperature applications. As leading EN 10216-2 P235GH Steel Pipe Manufacturers in Iraq, we ensure our products meet stringent industry standards for reliability and performance. These pipes in Iraq are manufactured through a seamless process, ensuring superior strength and durability. Our pipes in Iraq are finished with plain ends, beveled ends, or threaded ends to suit various installation needs.

  • Manufacture: Seamless Process
  • Outer Diameter: 21 mm to 509 mm
  • Wall Thickness: 2.1 mm to 20 mm
  • Length: 6M or specified length as required
  • Ends: Plain End, Beveled End, Threaded
Uses of EN 10216-2 P235GH Alloy Steel Pipes in Iraq

Looking for EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Iraq?

Our EN 10216-2 P235GH alloy steel pipes are widely used in the construction of boilers, pressure vessels, and pipelines due to their excellent high-temperature performance in Iraq. As trusted EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Iraq, we ensure that our pipes meet the specific needs of these demanding applications. These pipes are known for their durability, making them ideal for transporting fluids under high pressure and temperature conditions in Iraq.

  • Application Areas: Boilers, pressure vessels, pipelines in Iraq
  • Industries: Oil and gas, chemical processing, power generation in Iraq
  • Specific Uses: High-temperature fluid transport in Iraq
Quality Assurance of EN 10216-2 P235GH Alloy Steel Pipes in Iraq

Most Trusted EN 10216-2 P235GH Alloy Steel Pipes Exporters in Iraq

Our EN 10216-2 P235GH alloy steel pipes undergo rigorous testing to ensure they meet international standards and client specifications in Iraq. We provide comprehensive documentation, including Material Test Certificates (MTC), third-party inspection reports, and heat treatment charts in Iraq. As renowned EN 10216-2 P235GH Alloy Steel Pipes Exporters in Iraq, we are committed to delivering products that are reliable and of the highest quality.

  • Testing and Documentation: Material Test Certificates (MTC), Third Party Inspection Reports, Heat Treatment Charts in Iraq
  • Quality Control: Rigorous testing to meet international standards in Iraq
  • Commitment: Ensuring reliability and highest quality in every pipe in Iraq

EN 10216-2 1.0345 P235GH Seamless Steel Tubes

Manufacture Seamless Process
Out Diameter 21 mm——509mm
Wall Thickness 2.1mm——20 mm
Length 6M or Specified Length as Required.
Ends Plain End, Beveled End, Treaded

EN 10216-2 P235GH Seamless Steel Tubes

Steel grade Heat
treatment
a
Austenizing Tempering
Steel
name
Steel
number
Temperature °C Cooling
Medium
Temperature °C Cooling
medium
P235GH 1.0345 +N b 880 to 940 Air - -
a  +N = Normalising, +NT = Normalising + Tempering, +QT = Quenching + Tempering (air or liquid), +I = Isothermal Annealing.
b  Normalising includes Normalising Forming.

Chemical Composition of EN 10216-2 P235GH

Steel grade Steel
number
C Si Mn P
max
S
max
Cr Mo Ni
P235GH 1.0345 ≤ 0,16 ≤ 0,35 ≤ 1,20 0,025 0,020 ≤ 0,30 ≤ 0,08 ≤ 0,30
Al tot Cu Nb Ti max V Cr+Cu+Mo+Ni Others
≥ 0,020  ≤ 0,30  ≤ 0,010  0,040 ≤ 0,02  ≤ 0,70 -

Mechanical Properties of EN 10216-2 P235GH

Steel grade Upper yield strength or proof strength
R eH or Rp 0,2 for Wall Thickness T
min.
Tensile
Strength
Rm
Elongation
A min.
% a
Steel name Steel
number
T ≤ 16 16 < T ≤ 40 40 < T ≤ 60 60 < T ≤ 100 l t
MPa * MPa * MPa * MPa * MPa *
P235GH 1.0345 235 225 215 - 360 to 500 25 23

Dimensions Tolerances of EN 10216-2

Outside Diameter D mm Tolerances on
D
Tolerances on T for a T/D ratio
    ≤ 0,025 > 0,025
≤ 0,050
> 0,050
≤ 0,10
> 0,10
D ≤ 219,1 ± 1% or ± 0.5mm  
whichever is the greater
± 12,5% or ± 0.4mm whichever is the greater
D > 219,1 ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on Inside Diameter and Wall Thickness

Tolerances on inside diameter Tolerances on T for a T/d ratio
d d min ≤ 0,03 > 0,03
≤ 0,06
> 0,06
≤ 0,12
> 0,12
± 1% or ± 2 mm whichever is the greater (+ 2% ,0)or (+ 4 mm,0)
 
whichever is the greater ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on OutsideDiameter and Minimum Wall Thickness

Outside diameter D mm Tolerances on D Tolerances on T min for a T min /D ratio
≤ 0,02 > 0,02
≤ 0,04
> 0,04
≤ 0,09
> 0,09
D ≤ 219,1 ± 1% or ± 0.5mm
whichever is the greater
(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1 + 50%
0
+ 35%
0
+ 28%
0
+ 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on Inside Diameter and Minimum Wall Thickness

Tolerances
on inside diameter
Tolerances on T min for a
T min /d ratio
d d min ≤ 0,05 > 0,05
≤ 0,1
> 0,1
± 1% or ± 2 mm
whichever is the greater
(+2%,0) or (+ 4 mm,0) whichever is the greater + 35%
0
+ 28%
0
+ 22% a
0
For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on Exact Lengths

Length L Tolerance on exact length
L ≤ 6000 +10
0
6000 < L ≤ 12 000 +15
0
L > 12 000 + by agreement
0


Testings

(1)Chemical analysis
(2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature)
(3)Flattening test
(4)Ring tensile test
(5)Drift expanding test
(6)Ring expanding test
(7)Impact test
(8)Leak tightness test(Hydrostatic test,  Electromagnetic test)
(9)Dimensional inspection
(10) Visual examination
(11) Non-destructive testing

Ordering Information

Mandatory information
a) the quantity (mass or total length or number);
b) the term "tube";
c) the dimensions ;
d) the designation of the steel grade in accordance with this Part of EN 10216 ;
e) the test category for non-alloy steel .

Options

1) Cold finishing.
2) Restriction on copper and tin content.
3) Product analysis.
4) Impact testing .
5) Longitudinal impact testing at -10° C for non-alloy steel grades.
6) Tensile testing at elevated temperature .
7) Selection of leak-tightness test method .
8) Non-Destructive Testing for test category 2 tubes for detection of transverse imperfections.
9) Non-Destructive Testing for test category 2 tubes for detection of laminar imperfections .
10) Special ends preparation.
11) Set of dimensions other than D and T.
12) Exact lengths ).
13) The type of inspection document other than the standard document.
14) Test pressure for hydrostatic leak-tightness test .
15) Wall thickness measurement away from the ends .
16) Non-Destructive Testing method.
17) Additional marking .
18) Protection .

You may also like

EN 10219 S235JRH

At Tricon Steel & Alloys in Iraq, we pride ourselves on manufacturing high-quality EN 10219 S235JRH Carbon Steel Pipes that meet rigorous international standards. Being one of the finest EN 10219 S235JRH Carbon Steel Pipe Manufacturers in Iraq, we ensure our pipes are crafted to ensure durability and performance across various applications. These pipes are manufactured in Iraq to adhere to standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME.

Get Best Quote Read More

EN 10219 S355JOH

Tricon Steel & Alloys offers high-quality EN 10219 S355JOH Steel Pipes designed in Iraq to meet diverse industrial applications. As one of the most prominent EN 10219 S355JOH Steel Pipe Manufacturers in Iraq, we provide the products with assurance of quality.These pipes in Iraq adhere to stringent standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. Our seamless pipes range from 4mm to 219mm in diameter with wall thicknesses between 0.5mm and 20mm, while welded pipes are available from 5.0mm to 1219.2mm in size in Iraq.

Get Best Quote Read More

EN 10219 S275JOH

Tricon Steel & Alloys provides high-grade Carbon Steel Pipes in Iraq that comply with several international standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. As reliable EN 10219 S275JOH Steel Pipe Manufacturers in Iraq, we ensure that our pipes are produced from high quality raw materials. Our seamless pipes in Iraq range from 4mm to 219mm in diameter, with wall thicknesses between 0.5mm and 20mm. We offer welded pipes in Iraq ranging from 5.0mm to 1219.2mm in size and EFW pipes in the same dimensions.

Get Best Quote Read More

EN 10210 S355J2H

Tricon Steel & Alloys provides EN 10210 S355J2H Steel Pipes that meet stringent international standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME in Iraq. As leading EN 10210 S355J2H Steel Pipe Manufacturers in Iraq, we ensure precision in all our products. Our seamless pipes in Iraq are available in sizes ranging from 4mm to 219mm with wall thicknesses between 0.5mm and 20mm. The welded pipes in Iraq come in dimensions ranging from 5.0mm to 1219.2mm.

Get Best Quote Read More

EN 10217-1 P235TR1

At Tricon Steel & Alloys in Iraq, we offer top-quality EN 10217-1 P235TR1 steel pipes, ideal for a variety of applications. As one of the finest EN 10217-1 P235TR1 Steel Pipe Manufacturers in Iraq, we manufacture our products with the highest quality standards. These pipes in Iraq come in various lengths, including 3 meters, 6 meters, 18 meters, 36 meters, and longer. Our EN 10217-1 P235TR1 pipes are manufactured in Iraq in compliance with international standards. Available in a range of sizes and diameters, from 1/2 inch to over 4 inches, these pipes are suitable for diverse industrial requirements in Iraq.

Get Best Quote Read More

EN 10216-1 P235TR2

Tricon Steel & Alloys offers high-quality EN 10216-1 P235TR2 Steel Pipes, manufactured using a seamless process to ensure exceptional strength and durability in Iraq. As reliable EN 10216-1 P235TR2 Steel Pipe Manufacturers in Iraq, we ensure that these pipes are designed to meet a wide range of industrial applications. Available in Iraq in various dimensions, our pipes range from 14mm to 509mm in outer diameter and 2mm to 50mm in wall thickness. These pipes in Iraq can be supplied with plain ends, beveled ends, or threaded ends, depending on your specific requirements.

Get Best Quote Read More

EN 10216-3 P355N

At Tricon Steel & Alloys, we provide high-quality steel pipes, renowned in Iraq for their exceptional strength and durability. We take pride in being one of the leading EN 10216-3 P355N Steel Pipe Manufacturers in Iraq. These pipes in Iraq are available in round shapes with nominal lengths of 3 meters, 6 meters, and 9 meters, or customized as per your requirements. Our EN 10216-3 P355N steel pipes are all new, with single piece lengths ranging from 6 meters to 18 meters, or as specified in Iraq .

Get Best Quote Read More

EN 10216-2 P265GH

At Tricon Steel & Alloys in Iraq, we offer high-quality EN 10216-2 P265GH steel pipes that meet stringent international standards for seamless pressure service. As one of the leading EN 10216-2 P265GH Steel Pipe Manufacturers in Iraq, we offer products that are made frpm high-quality raw materials and are available at competitive prices. We provide in Iraq lengths of 5.8m, 11.8m, 12m, or random lengths. The pipes are normalized to ensure superior performance in high-pressure environments in Iraq.

Get Best Quote Read More

S355J2 Carbon Steel Round Bar

Tricon Steel & Alloys specializes in manufacturing S355J2 Carbon Steel Round Bars in Iraq that meet the highest quality standards. As leading S355J2 Carbon Steel Round Bar Manufacturers in Iraq, we make sure that our round bars are available in various forms including round, hexagonal, flat, half-round, oval, and rectangular shapes, offered in both black and bright finishes. We ensure flexibility with sizes ranging from 22mm up to 800mm, with thickness options spanning 1 to 2 inches in Iraq. Each bar in Iraq is crafted to precise lengths of 3 meters or 6 meters, catering to diverse industrial requirements.

Get Best Quote Read More
Get a Quote