IS 1239 Carbon Steel Pipe in Czech Republic

Get Premium Products Directly from IS 1239 Carbon Steel Pipe Manufacturers in Czech Republic

IS 1239 Carbon Steel Pipe in Czech Republic
Get Best Quote
Specifications in Czech Republic of IS 1239 Carbon Steel Pipe

Tricon Steel & Alloys stands as a premier manufacturer of IS 1239 Carbon Steel Pipes, meeting stringent industrial standards in Czech Republic with precision and reliability. As reliable  IS 1239 Carbon Steel Pipe Manufacturers in Czech Republic, we can offer a wide range of pipes in different sizes, thicknesses, and dimensions. Our pipes in Czech Republic conform to the IS 1239 standard and are available in a wide range of sizes and thicknesses to cater to diverse application needs. We offer MS IS 1239 B Class Seamless Pipes ranging from 4mm to 219mm outer diameter (OD) with wall thicknesses from 0.5mm to 20mm in Czech Republic.

  • Specifications: AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe
  • IS 1239 YST 310 Welded Pipe Size: 5.0 mm – 1219.2 mm
  • IS 1239 grade YST 310 Tube Swg & Bwg: 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
  • IS 1239 YST 240 Pipe Schedule: SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • IS 1239 CS Tube wall thickness: 0.020" – 0.220"
Uses of IS 1239 Carbon Steel Seamless Pipes in Czech Republic

Looking for IS 1239 Carbon Steel Seamless Pipes Suppliers in Czech Republic?

Our Pipes in Czech Republic find extensive application across industries for their robust construction and reliable performance. These pipes in Czech Republic are used in oil, gas, and fluid transmission pipelines, as well as in boilers and heat exchangers. As one of the most prominent  IS 1239 Carbon Steel Seamless Pipes Suppliers in Czech Republic, we ensure that each pipe meets the specific requirements of our clients.

  • Application Areas: Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube in Czech Republic
  • Industrial Usage: Structural applications, general engineering purposes in Czech Republic
  • Heat Exchangers: Efficient heat transfer systems in Czech Republic
Quality Assurance of IS 1239 Carbon Steel Seamless Pipes in Czech Republic

Most Trusted IS 1239 Carbon Steel Seamless Pipes Exporters in Czech Republic

Each pipe in Czech Republic undergoes rigorous testing procedures to ensure adherence to international standards and customer specifications. We provide comprehensive material test certificates (MTC) as per EN 10204/3.1B and other required documentation in Czech Republic. As one of the leading IS 1239 Carbon Steel Seamless Pipes Exporters in Czech Republic, we prioritize reliability, durability, and performance, making us a trusted partner for industrial piping solutions.

  • Testing: Material properties, chemicalcomposition, and, dimensional accuracy in Czech Republic
  • Documentation: Material Test Certificates (MTC), Third Party Inspection Reports in Czech Republic
  • Additional Services: Customized pipe cutting, bending, machining services in Czech Republic

Carbon Steel IS 1239 YST 240 Tubes Specification

Standard AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe
MS IS 1239 B Class Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
IS 1239 YST 310 Welded Pipe Size 5.0 mm – 1219.2 mm
Carbon Steel IS 1239 YST 355 EFW Pipe size 5.0 mm – 1219.2 mm
IS 1239 grade YST 310 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
IS 1239 YST 240 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
High-Alloy Steel IS 1239 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
IS 1239 grade YST 310 Welded Tube Size 6.35 mm OD To 152 mm OD
IS 1239-97 Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
IS 1239 CS Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
IS 1239 Mild Steel Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Mild Steel IS 1239 Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
IS 1239 Carbon Steel Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
IS 1239 YST 310 Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
Carbon IS1239 Grade C Steel End Plain End, Beveled End, Treaded Pipe & Tube
MS IS 1239 B Class Marking All IS 1239 YST 210 / 240 / 310 Carbon Steel Pipes & Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Carbon IS 1239 steel Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
Carbon Steel IS 1239 YST 355 Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
IS 1239 YST 210 Specialize in
  • IS 1239 CS Large Diameter Pipe
  • Carbon IS1239 Grade C Steel Capillary Tube
  • IS 1239 YST 355 / 210 / 240 / 310 Heat Exchanger &
  • Carbon Steel IS1239 Condenser Tube
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report,
Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts,
IS 1239 Carbon Steel Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)
Manufacturers of Carbon IS 1239 steel Pipe
  • Kobe Special Tube, Japan
  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea
We can also cut, thread, and groove IS 1239 Mild Steel Pipe to meet your specifications. Pipe Dimension ANSI/ ASME B36.19, B36.10, B2.1
SPEC OUT SIDE DIAMETER WALL

THICKNESS

 WEIGHT LENGTH
PIPE BODY PIPE END

IS:1239 &
BS:1387

 As per table N.A. Light – 8% + not limited Medium & Heavy – 10%,
  1. not limited

 

 Carload 10 MT Light +7.5%, -5%,
M & H ± 7.5%
Single Tube Light -8% + 10%Med & Heavy ± 10%Carload 10MT and above ± 7.5%

NORMAL

Avg. (MIN)

MINIMUM

MAXIMUM

ft

mtr

ft

mtr

ft

mtr

ft

mtr

 

6.0

 

 

 

4.0

 

7.0

 

12.0

 

 

 

7.0

 

14.0

Tolarance – Exact length – + 6, -0mm
Approximate length ± 150mm

Chemical Composition of IS 1239 Mild Steel Pipes

 

Chemical Composition (%) Max.

   Mechanical Properties          

Impact
                                         

Energy
Specification Grade C Mn P S Si C.E. Yield Strength   Tensile Strength     % Elongation
     

J (Ft.lb)
              PCM IIW Min Max Min

Max

  
                e (min)

(min.)
                  PSI MPa PSI   MPa PSI

MPa

PSI

MPa

    
                           
IS:1239  

0.20

1.30

0.040

0.040

 

 

 

 

 

 

  

 

 

320

 

 

   12 UPTO 25 mm NB

 
                                      20 ABOVE 25 mm  
  Fe 330

0.16

1.20

0.040

0.040

 

 

 

 

195

 

  

 

 

330

 

 

   20

 
  Fe 410

0.20

1.30

0.040

0.040

 

 

0.45

 

235

 

  

 

 

410

 

 

   18

 
  Fe 450

0.25

1.20

0.040

0.040

 

 

0.45

 

275

 

  

 

 

450

 

 

   15  
                                      GL= 5.65 Area

IS 1239 YST 210 / 240 / 310 / 355 Tubes Equivalent Properties

IS 1239 material specification & equivalent grades
IS 1239 yst 355 IS 1239 yst 355 Tata Structura 355 DIN: 2440, 2441, BS: 1387, S: 3589, 1239 ISO: 65
IS 1239 Pipe Types Out diameter Wall thickness Length
IS 1239 ERW Pipe (Custom Sizes) 1/2″ NB – 24″ NB As per requirement Custom
IS 1239 SAW Pipe 16″ NB – 100″ NB As per requirement Custom
IS 1239 Seamless Pipe (Custom Sizes) 1/2″ NB – 60″ NB SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Custom
IS 1239 Welded Pipe (in Stock + Custom Sizes) 1/2″ NB – 24″ NB As per requirement Custom

IS 1239 Pipe Schedule Chart & IS 1239 Pipe Weight

Size NPS Pipe O.D. Wall Thickness Pipe I.D. Weight per Foot Standard to XXHY Schedule
Pipe #		 Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
    0.147 0.546 1.09 XHY 80 .0478 .0122
    0.188 0.464 1.31   160 .0528 .0088
    0.294 0.252 1.72 XXHY   .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
    0.154 0.742 1.48 XHY 80 .0853 .0225
    0.219 0.612 1.95   160 .1006 .0153
    0.308 0.434 2.44 XXHY   .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
    0.179 0.957 2.17 XHY 80 .1606 .0374
    0.250 0.815 2.85   160 .1904 .0271
    0.358 0.599 3.66 XXHY   .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
    0.191 1.278 3.00 XHY 80 .2913 .0666
    0.250 1.160 3.77   160 .3421 .0549
    0.382 0.896 5.22     .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
    0.200 1.500 3.63 XHY 80 .4118 .0918
    0.281 1.338 4.86   160 .5079 .0730
    0.400 1.100 6.41     .5977 .0494
2 2.375 0.109 2.157 2.64   10 .4205 .1898
    0.154 2.067 3.66 STD 40 .5606 .1743
    0.218 1.939 5.03 XHY 80 .7309 .1534
    0.250 1.875 5.68     .8045 .1434
    0.281 1.813 6.29     .8666 .1344
    0.344 1.687 7.47   160 .9806 .1161
    0.436 1.503 9.04 XXHY   1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53   10 .6870 .2833
    0.203 2.469 5.80 STD. 40 1.0640 .2487
    0.216 2.443 6.14     1.1169 .2435
    0.250 2.375 7.02     1.2468 .2301
    0.276 2.323 7.67 XHY 80 1.3386 .2202
    0.375 2.125 10.02   160 1.6371 .1842
    0.552 1.771 13.71 XXXHY   1.9971 .1280
3 3.50 0.120 3.260 4.34     1.0411 .4336
    0.156 3.188 5.58     1.3122 .4147
    0.172 3.156 6.12     1.4265 .4064
    0.188 3.124 6.66     1.5342 .3984
    0.216 3.068 7.58 STD. 40 1.7241 .3840
    0.250 3.000 8.69     1.9372 .3672
    0.281 2.938 9.67     2.1207 .3521
    0.300 2.900 10.26 XHY 80 2.2253 .3431
    0.438 2.624 14.34   160 2.8774 .2811
    0.600 2.300 18.6 XXHY   3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98   10 1.3776 .5768
    0.226 3.548 9.12 STD. 140 2.3939 .5136
    0.250 3.500 10.02     2.6001 .4998
    0.281 3.438 11.17     2.8562 .4821
    0.318 3.364 12.52 XHY 80 3.1400 .4617
    0.636 2..728 22.87 XXHY   4.8795 .3085
4 4.5 0.120 4.260 5.62   10 1.7612 .7404
    0.156 4.188 7.24     2.2354 .7156
    0.188 4.124 8.67     2.6296 .6942
    0.203 4.094 9.32     2.8173 .6838
    0.219 4.062 10.02     3.0184 .6725
    0.237 4.026 10.80 STD. 40 3.2145 .6613
    0.250 4.000 11.36     3.3611 .6528
    0.281 3.938 12.67   60 3.7021 .6326
    0.312 3.876 13.97     4.0273 .6126
    0.337 3.826 15.00 XHY 80 4.2713 .5972
    0.438 3.624 19.02   120 5.1790 .5361
    0.531 3.438 22.53   160 5.8997 .4822
    0.674 3.152 27.57 XXHY   6.7927 .4054
5 5.563 0.188 5.187 10.80     4.1161 1.0979
    0.219 5.125 12.51     4.7279 1.0716
    0.258 5.047 14.63 STD. 40 5.4500 1.0391
    0.281 5.001 15.87     5.8644 1.0204
    0.312 4.939 17.51     6.4074 .99647
    0.344 4.875 19.19     6.9358 .9696
    0.375 4.813 20.80 XHY 80 7.4300 .9449
    0.500 4.563 27.06   120 9.2534 .8495
    0.625 4.313 32.99   160 10.7976 .7590
    0.750 4.063 38.59 XXHY   12.0954 .6734
6 6.625 0.109 6.407 7.59   5 3.5769 1.6748
    0.134 6.357 9.30   10 4.3475 1.6488
    0.156 6.313 10.79     5.0107 1.6260
    0.188 6.249 12.94     5.9351 1.5937
    0.203 6.219 13.94     6.3804 1.5780
    0.219 6.187 15.00     6.8261 1.5620
    0.250 6.125 17.04     7.6905 1.5306
    0.280 6.065 18.99 STD. 40 8.4958 1.5008
    0.312 6.001 21.06     9.3416 1.4688
    0.344 5.937 23.10     10.111 1.4391
    0.375 5.875 25.05     10.893 1.4082
    0.432 5.761 28.60 XHY 80 12.224 1.3541
    0.500 5.625 32.74     13.711 1.2909
    0.562 5.501 36.43   120 14.9806 1.2346
    0.625 5.375 40.09     16.1821 1.1787
    0.719 5.187 45.39   160 17.8243 1.0977
    0.864 4.897 53.21 XXHY   20.025 .9784
    1.000 4.625 60.13     21.7719 .8727
    1.125 4.375 66.14     23.1237 .7809

IS 1239 YST 310 General Technical Specifications and Tolerances

PERMISSIBLE AXIAL COMPRESSIVE STRESS (YST 310 Grade)
1/r 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ac 186 183 178 169 157 143 128 113 99 87 77 67 60 53
1/r 150 160 170 180 190 200 210 220 230 240 250 300 350  
Ac 47 42 38 34 31 28 26 23 22 20 18 13 10  
OTHER ALLOWABLE STRESS VALUES (in Mpa)
Steel Grade Minimum Yield stress Minimum UTS Axial Stress in Tension Bending Stress in Ten. Or Compn. Shear Stress Bearing Stress 232 Equivalent Stress
Yst 310 310 450 186 205 140 232 279
Section Type Grade Mechanical Properties Dimensional Tolerance
YST UTS % of Elongation Outside dimension Thickness Squareness Corner radius Weight
Mpa Mpa < 25.4 mm > 25.4 mm Individual lengtds On lot of 10 MT
RHS/SHS IS : 1239 YST 210 210 330 12 20 +/-1% with a minimum of +/-0.50 mm +/-10% 90 deg +/-2 deg. 3t max 10%-8% +/-7.5%
YST 240 240 410 10 15
YST 310 310 450 8 10
CHS IS : 1161 YST 210 210 330 12 20 OD upto and incl 48.3+0.4/-0.8mm. Over 48.3 mm +/-1.0% + no limit -10% NA NA L +10%, -8% L +/-5%
YST 240 240 410 12 17 M & H +/-10% M & H +/-7.5%
YST 310 310 450 12 14
*YST 210 and YST 240 are also manufactured *Galvanized sections can also be manufactured
Length 6.0 m +/- 0.05 m Customized length ranging from 6 m to 11 m may be supplied.
Straightness Minimum 1 : 200th of any length measured along the centre line (mill straightened condition) unless
otherwise specifically arranged.
Twist tolerance Maximum 2 mm ± 0.05 mm/m length-measured relative vertical shift of any adjacent corner of the section, measured by keeping one side on flat surface.
End Finish Plain ended-Mechanically sheared, mill-cut finish without further machining.
Surface Finish / Chemical Properties Black without any surface treatment of oiling or varnishing.
Raw Material Sulphur content: 0.05% max, phosphorus content: 0.05% max, equivalent carbon percentage well within specified weldability limits with matching physical properties. For corrosion resistant steel in Cu-bearing variety, refer to the WRS section.
Weldability Tata Structura Steel Hollow Sections are weldable with standard M.S. Electrodes without any pre-heating.
Packing Bundled by sealing metal strap and each bundle is labelled for size, measurement, lot number etc. Approximate weight of each bundle is 1.5 Mt (+/-500 kg).
Identification Marking of ‘TATA STRUCTURA’ emblem on surface, punched/stencilled/sticker pasted, on all Steel Hollow Sections. Standard BIS mark is also put on the sections.
Note Tata Structura Hollow Sections in customized size, grade, length, surface finish and end finish may be delivered as per agreed supply conditions.

IS 1239 YST 355 Pipe Pressure Rating Chart

Maximum Allowable Pressure (psi)
NPS Outside Diameter Schedule
(in) (in) 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS
1/4 0.54       7985 7985   10798 10798          
3/8 0.675       6606 6606   9147 9147          
1/2 0.84       6358 6358   8575 8575       10908 17150
3/4 1.05       5273 5273   7187 7187       10220 14373
1 1.315       4956 4956   6670 6670       9316 13340
1 1/4 1.66       4133 4133   5638 5638       7380 11276
1 1/2 1.9       3739 3739   5158 5158       7247 10316
2 2.375       3177 3177   4498 4498       7097 8995
2 1/2 2.875       3460 3460   4704 4704       6391 9408
3 3.5       3024 3024   4200 4200       6132 8400
3 1/2 4       2769 2769   3896 3896          
4 4.5       2581 2581   3670 3670   4769   5782 7339
5 5.563       2273 2273   3303 3303   4404   5505 6606
6 6.625       2071 2071   3195 3195   4157   5318 6390
8 8.625   1420 1574 1829 1829 2307 2841 2841 3375 4085 4613 5147 4971
10 10.75   1140 1399 1664 1664 2279 2279 2708 3277 3847 4558 5128 4558
12 12.75   961 1268 1441 1560 2160 1922 2644 3244 3843 4324 5042 3843
14 14 875 1092 1313 1313 1533 2079 1750 2625 3283 3829 4375 4921  
16 16 766 956 1148 1148 1531 2009 1531 2585 3157 3733 4404 4882  
18 18 681 849 1192 1021 1530 2042 1361 2553 3147 3743 4252 4848  
20 20 613 919 1225 919 1455 1989 1225 2526 3138 3675 4288 4824  
22 22 557 835 1114 835   1949 1114 2506 3063 3619 4176 4733  
24 24 510 766 1147 766 1405 1978 1021 2489 3126 3700 4210 4786  
30 30 510 817 1021 613     817            
32 32 478 766 957 574 1054                
34 34 450 721 901 540 992                
36 36 425 681 851 510 1021                
42 42   583 729 438 875                
                             

IS 1239 Steel Pipe Sizes

1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)  
SCH 5, 10, 40, 80, 160, XXH  

Is 1239 Tubes Sizes

Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

Carbon Steel IS 1239 YST 210 Tubes Price List

IS 1239 YST 310 Price Per Piece in India Carbon Steel IS 1239 YST 355 Price in INR IS 1239 YST 240 Price in Saudi Riyal High-Alloy Steel IS 1239 Price in UAE Dirham
IS 1239 YST 310 Pipe Price in India Rs.50 Saudi Riyal 2.64 UAE Dirham 2.59
Carbon Steel IS 1239 YST 355 Pipe Price in India Rs.58 Saudi Riyal 3.06 UAE Dirham 3.00
IS 1239 YST 240 Pipe Price List Rs.72 Saudi Riyal 3.80 UAE Dirham 3.73
High-Alloy Steel IS 1239 Pipe Cost in Mumbai Rs.34 Saudi Riyal 1.79 UAE Dirham 1.76
Price of IS 1239-97 Pipe in Mumbai Rs.40 Saudi Riyal 2.11 UAE Dirham 2.07
MS IS 1239 B Class Pipe Price in India Rs.55 Saudi Riyal 2.90 UAE Dirham 2.85
You may also like
ASTM A53 Grade B Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A53 Grade B Carbon Steel Pipe

Tricon Steel & Alloys excels as ASTM A53 Grade B Carbon Steel Pipe, offering pipes that adhere to stringent industry standards in Czech Republic. As one of the most prominent ASTM A53 Grade B Carbon Steel Pipe Manufacturers in Czech Republic, we are committed to offering the best quality pipes at the most competitive prices. Our pipes in Czech Republic are available in sizes ranging from 1/2” NB to 36”NB, with thicknesses varying from 3 to 12 millimeters. We provide both seamless and welded options in Czech Republic, catering to diverse application needs.

Get Best Quote Read More
ASTM A106 Grade B Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A106 Grade B Carbon Steel Pipe

Tricon Steel & Alloys in Czech Republic excels as a provider of ASTM A106 Grade B Carbon Steel Pipes, offering a comprehensive range designed to meet diverse industrial needs. As one of the most reliable ASTM A106 Grade B Carbon Steel Pipe Manufacturers in Czech Republic, we offer products that are available in different schedules, wall thickness, and diameters to suit a wide range of applications. Available in sizes ranging from 1/2” NB to 36” NB with thicknesses from 3 mm to 12 mm, these pipes in Czech Republic are crafted using advanced manufacturing techniques such as cold rolling and cold drawing.

Get Best Quote Read More
ASTM A333 Grade 6 Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A333 Grade 6 Carbon Steel Pipe

Tricon Steel & Alloys is the finest provider of ASTM A333 Grade 6 Carbon Steel Pipes, offering a wide range of sizes and specifications to meet diverse industrial requirements in Czech Republic. Being premier ASTM A333 Grade 6 Carbon Steel Pipe Manufacturers in Czech Republic, we offer pipes that are manufactured to meet the highest standards of quality and performance. Our pipes in Czech Republic adhere to stringent standards, including ASTM, ASME, and API, ensuring reliability and performance.

Get Best Quote Read More
ASTM A671 Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A671 Carbon Steel Pipe

Tricon Steel & Alloys is a leading provider of ASTM A671 Carbon Steel Pipes, designed in Czech Republic to meet diverse industrial requirements with precision and reliability. As one of the finest ASTM A671 Carbon Steel Pipe Manufacturers in Czech Republic, we are capable of providing the best quality products to our customers. Our pipes in Czech Republic adhere to ASTM A671 / ASME SA671 specifications, available in sizes ranging from 2 inches to 24 inches in outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.

Get Best Quote Read More
ASTM A671 CC65/CC70 Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A671 CC65/CC70 Carbon Steel Pipe

Tricon Steel & Alloys is a trusted provider in Czech Republic of ASTM A671 CC65/CC70 Carbon Steel Pipes, adhering to ASTM A671 / ASME SA671 standards. As one of the finest ASTM A671 CC65/CC70 Carbon Steel Pipe Manufacturers in Czech Republic, we ensure our pipes are available in a range of sizes from 2 inches to 24 inches outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.

Get Best Quote Read More
S275 JR Carbon Steel Pipe Manufacturers in Czech Republic

S275 JR Carbon Steel Pipe

Tricon Steel & Alloys proudly makes S275JR Carbon Steel Pipes to exacting standards, ensuring reliability and durability for diverse industrial applications in Czech Republic. As reliable S275JR Carbon Steel Pipe Manufacturer in Czech Republic, we are committed to providing the highest quality products. Our pipes in Czech Republic conform to SAE/AISI 1008 (Si 0.03%) and are compliant with various international specifications, including EN 10219 -1- S275 J0H, EN 10219 -1- S355 MH, and EN 10025 -2- S275JR+AR.

Get Best Quote Read More
ASTM A210 GRADE A1 Carbon Steel Pipe Manufacturers in Czech Republic

ASTM A210 GRADE A1 Carbon Steel Pipe

ASTM A210 Grade A1 Carbon Steel Seamless Pipes find extensive application in industries in Czech Republic requiring high-quality, low and medium pressure boiler tubes. These pipes are designed in Czech Republic to withstand elevated temperatures and pressures, making them ideal for use in boilers, heat exchangers, condensers, and similar applications. As one of the most prominent ASTM A210 Gr A1 Carbon Steel Seamless Pipes Suppliers in Czech Republic, we deliver our products within the quickest turnaround time.

Get Best Quote Read More
IS 3589 FE 410 Carbon Steel Pipe Manufacturers in Czech Republic

IS 3589 FE 410 Carbon Steel Pipe

At Tricon Steel & Alloys in Czech Republic, we manufacture IS 3589 Fe 410 Carbon Steel Pipes to meet the demanding standards of various industrial applications. As one of the leading IS 3589 Fe 410 Carbon Steel Pipe Manufacturers in Czech Republic, we manufacture these pipes using premium quality raw material sourced from trusted vendors. These pipes in Czech Republic, available in sizes ranging from 15 Nominal Bore to 150 Nominal Bore, are built to ensure durability and performance.

Get Best Quote Read More

© 2024 Tricon Steel & Alloys. All Rights Reserved.

Market Area is present in

116 Cities
Crafted with by Webpulse - Web Designing, Digital Marketing & Branding Company
Get a Quote