ASTM A53 Grade B Carbon Steel Pipe Manufacturers in Australia

Searching for ASTM A53 Grade B Carbon Steel Pipe in Australia

Specifications in Australia of ASTM A53 Grade B Carbon Steel Pipe

Tricon Steel & Alloys excels as ASTM A53 Grade B Carbon Steel Pipe, offering pipes that adhere to stringent industry standards in Australia. As one of the most prominent ASTM A53 Grade B Carbon Steel Pipe Manufacturers in Australia, we are committed to offering the best quality pipes at the most competitive prices. Our pipes in Australia are available in sizes ranging from 1/2” NB to 36”NB, with thicknesses varying from 3 to 12 millimeters. We provide both seamless and welded options in Australia, catering to diverse application needs.

  • Specifications: ASTM A53 ASME SA53
  • Size Range: 1/2” NB to 36” NB
  • Thickness: 3-12 millimeter
  • Type: ERW / Seamless / Fabricated / Welded
  • Schedules: Schedule 40, 80, 160, XS, XXS
  • Ends: Beveled End, Plain End, Treaded
  • Length: Minimum 3 meters, Maximum 18 meters
  • Form: Hydraulic, Round, etc.
Uses of ASTM A53 Carbon Steel Seamless Pipes in Australia

Looking for ASTM A53 Carbon Steel Seamless Pipes Suppliers in Australia?

ASTM A53 Grade B Carbon Steel Seamless Pipes find extensive application across various industries in Australia due to their robustness and versatility. These pipes in Australia are widely used in water supply systems, oil and gas pipelines, structural applications, and more. Their ability to withstand high pressure and temperature conditions makes them suitable for conveying fluids and gases in challenging environments in Australia. As one of the the finest ASTM A53 Carbon Steel Seamless Pipes Suppliers in Australia, we offer pipes that are made using high

  • Oil and Gas Pipelines: Transmission pipelines for petroleum and natural gas in Australia
  • Structural Applications: Construction of buildings, bridges, and infrastructure in Australia
  • General Engineering: Piping solutions for mechanical and structural purposes in Australia
Quality Assurance of ASTM A53 Carbon Steel Seamless Pipes in Australia

Most Trusted ASTM A53 Carbon Steel Seamless Pipes Exporters in Australia

Each pipe in Australia undergoes stringent testing and inspection procedures, ensuring compliance with ASME, ASTM, and API standards. We provide comprehensive documentation in Australia, including mill test certificates and third-party inspection reports, to guarantee the quality and reliability of our products. Being ASTM A53 Carbon Steel Seamless Pipes Exporters in Australia, we also provide timely and safe delivery of products.

  • Testing and Inspection: Mechanical properties, dimensional accuracy in Australia
  • Documentation: Mill test certificates, Third-party inspection reports in Australia
  • Packaging: Secure packaging to prevent damage during transit in Australia

SA 53 Gr B Cement Lined Pipes Standard Sizes and Schedule Specifications

Specifications ASTM A53 ASME SA53
Length Minimum 3 Meters, Maximum 18 Meters
Type ERW / Seamless / Fabricated / Welded
Dimensions ASME, ASTM, and API
Form Hydraulic, Round, Etc
Size 1/2” NB to 36” NB
Thickness 3-12milimeter
Schedules Schedule 40, 80, 160, XS, XXS
End Beveled End, Plain End, Treaded

Latest Price List of ASTM A53 Gr. B Carbon Steel Pipes

Size" MSL Make ISMT make JSL Make
1/2" 1,323.53 1,316.18 1,330.88
3/4" 1,102.94 1,095.59 1,110.29
1" 955.88 948.53 963.24
1.25" 911.76 904.41 919.12
1.5" 808.82 801.47 816.18

ASTM A53 Schedule 40 Pipe Dimension Standard

NPS Designator DN Designator Outside Diameter Inside Diameter Wall Thickness Nominal Weight (Mass) Per Unit Length
(mm) (mm) (mm) Plain End (kg/m) Threads & Couplings (kg/m
1/8″ 6 10.3 6.8 1.73 0.37 0.37
1/4″ 8 13.7 9.2 2.24 0.63 0.63
3/8″ 10 17.1 12.5 2.31 0.84 0.84
1/2″ 15 21.3 15.8 2.77 1.27 1.27
3/4″ 20 26.7 20.9 2.87 1.69 1.69
1″ 25 33.4 26.6 3.38 2.5 2.5
1-1/4″ 32 42.2 35.1 3.56 3.39 3.4
1-1/2″ 40 48.3 40.9 3.68 4.05 4.04
2″ 50 60.3 52.5 3.91 5.44 5.46
2-1/2″ 65 73 62.7 5.16 8.63 8.67
3″ 80 88.9 77.9 5.49 11.29 11.35
3-1/2″ 90 101.6 90.1 5.74 13.57 13.71
4″ 100 114.3 102.3 6.02 16.07 16.23
5″ 125 141.3 158.2 6.55 21.77 22.07
6″ 150 168.3 154.1 7.11 28.26 28.58
8″ 200 219.1 202.7 8.18 42.55 43.73
10″ 250 273 254.5 9.27 60.29 63.36
12″ 300 323.8 304.8 9.52 73.78 76.21

Avalaibale Length of SA53 Gr.B Pipes

Standard Weight
  Single Random — 16′ – 22′. 5% may be jointers. If Plain Ends — 5% may be 12′ – 16′.
  Double Random — Shortest Length 22′, minimum average for order 35′.
Extra Strong and Double Extra Strong
  Single Random — 12′ -22′. 5% may be 6′ – 12′.
  Double Random (XS and lighter) — Shortest Length 22′, minimum average for order 35′.
  Lengths longer than single random with wall thicknesses heavier than XS subject to negotiation.
  O.D. Over Under
Outside Diameter NPS 1/8 to 1-1/2 DN 6 to 40 1/64″ (0.4mm) 1/64″ (0.4mm)
NPS 2 and up DN 50 and up 1% 1%
Wall Thickness at Any Point ——– 12.50%
Weight 10% 10%

ASTM A53 Grade B ERW Pipes Schedule Chart

NB OD Size 40S 5S 10S S10 S20 S60 S40 S80 XS/80S S120 S100 S160 S140 XXS
  13.72 1/4     1.7       2.24 3.02            
  17.15 3/8     1.7       2.31 3.2            
20 26.67 3/4 2.9 1.7 2.1       2.87 3.91 3.91     5.56   7.82
25 33.4 1 3.4 1.7 2.8       3.38 4.55 4.55     6.35   9.09
32 42.16 1 1/4 3.6 1.7 2.8       3.56 4.85 4.85     6.35   9.7
40 48.26 1 1/2 3.7 1.7 2.8       3.68 5.08 5.08     7.14   10.2
50 60.33 2 3.9 1.7 2.8       3.91 5.54 5.54     9.74   11.1
65 73.03 2 1/2 5.2 2.1 3.1       5.16 7.01 7.01     9.53   14
90 101.6 3 1/2 5.7 2.1 3.1       5.74 8.08 8.08          
100 114.3 4 6 2.1 3.1       6.02 8.56 8.56 11.1   13.5   17.1
150 168.3 6 7.1 2.8 3.4       7.11 11 10.97 14.3   18.3   22
300 323.9 12 9.5 4 4.6   6.4 14.3 10.3 17.5 12.7 25.4 21.4 33.3 28.6 25.4
350 355.6 14 9.5 4 4.8 6.4 7.9 15.1 11.1 19.1 12.7 27.8 23.8 35.7 31.8  
450 457.2 18 9.5 4.2 4.8 6.4 7.9 19.1 14.3 23.8 12.7 34.9 29.4 45.2 39.7  
500 508 20 9.5 4.8 5.5 6.4 9.5 20.6 15.1 26.2 12.7 38.1 32.5 50 44.5  
600 609.6 24 9.5 5.5 6.4 6.4 9.5 24.6 17.5 31 12.7 46 38.9 59.5 52.4  
650 660.4 26 9.5     7.9 13       12.7          
750 762 30 9.5 6.4 7.9 7.9 13       12.7          
800 812.8 32 9.5     7.9 13   17.5   12.7          
900 914.4 36 9.5     7.9 13   19.1   12.7          

Outside Diameter of Carbon Steel Pipe ASTM A53 Grade B

For NPS 1 1/2 and Smaller Sizes For NPS 2 and Larger Sizes
1/64" 1/32" under 1% over 1%under

ASTM A53 Grade B Welded Pipe Mostly Used In:

  •  Refineries
  •  Power Plants
  •  Boilers
  •  Ship Building
  •  Heat Exchangers
  •  Condensers
  •  Paper & Pulp
  •  Marine Applications
  •  Nuclear Power
  •  Fossil Fuel Power Plants etc.

Pressure Rating of ASME SA53 Pipe

Carbon Steel Pipes – Working Pressure
Nominal Size
(inches)
Pipe Outside Diameter
OD
(inches)
Schedule Number or weight Wall Thickness
– t –
(inches)
Inside Diameter
– d –
(inches)
Working Pressure ASTM A53 B to 400°F
Manu-
facturing Process
Joint Type psig
1/4 0.540 40ST 0.088 0.364 CW1) T 188
80XS 0.119 0.302 CW T 871
3/8 0.675 40ST 0.091 0.493 CW T 203
80XS 0.126 0.423 CW T 820
1/2 0.840 40ST 0.109 0.622 CW T 214
80XS 0.147 0.546 CW T 753
3/4 1.050 40ST 0.113 0.824 CW T 217
80XS 0.154 0.742 CW T 681
1 1.315 40ST 0.133 1.049 CW T 226
80XS 0.179 0.957 CW T 642
1 1/4 1.660 40ST 0.140 1.380 CW T 229
80XS 0.191 1.278 CW T 594
1 1/2 1.900 40ST 0.145 1.610 CW T 231
80XS 0.200 1.500 CW T 576
2 2.375 40ST 0.154 2.067 CW T 230
80XS 0.218 1.939 CW T 551
2 1/2 2.875 40ST 0.203 2.469 CW W 533
80XS 0.276 2.323 CW W 835
3 3.500 40ST 0.216 3.068 CW W 482
80XS 0.300 2.900 CW W 767
4 4.500 40ST 0.237 4.026 CW W 430
80XS 0.337 3.826 CW W 695
6 6.625 40ST 0.280 6.065 ERW2) W 696
80XS 0.432 5.761 ERW W 1209
8 8.625 30 0.277 8.071 ERW W 526
40ST 0.322 7.981 ERW W 643
80XS 0.500 7.625 ERW W 1106
10 10.75 30 0.307 10.136 ERW W 485
40ST 0.365 10.020 ERW W 606
XS 0.500 9.750 ERW W 887
80 0.593 9.564 ERW W 1081
12 12.75 30 0.330 12.090 ERW W 449
ST 0.375 12.000 ERW W 528
40 0.406 11.938 ERW W 583
XS 0.500 11.750 ERW W 748
80 0.687 11.376 ERW W 1076
14 14.00 30ST 0.375 13.250 ERW W 481
40 0.437 13.126 ERW W 580
XS 0.500 13.000 ERW W 681
80 0.750 12.500 ERW W 1081
16 16.00 30ST 0.375 15.250 ERW W 421
40XS 0.500 15.000 ERW W 596
18 18.00 ST 0.375 17.250 ERW W 374
30 0.437 17.126 ERW W 451
XS 0.500 17.000 ERW W 530
40 0.562 16.876 ERW W 607
20 20.00 20ST 0.375 19.250 ERW W 337
30XS 0.500 19.000 ERW W 477
40 0.593 18.814 ERW W 581

ASME SA 53 Grade B Pipe Available Surface Finish

Surface Finishes Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap
End Finishes Beveled, Square Cut, Threaded & Coupled

Epoxy Coated A 53 Gr B Pipes Chemical Composition Standard

A53 Gr.B C Mn P S Cu Ni Cr Mo V
0.3 1.2 0.05 0.045 0.4 0.4 0.4 0.15 0.08

FBE Coated ASTM A53b Pipes Mechanical Properties Tensile Strength

Grade Yield Strength Tensile Strength
A53 Gr.B 240 415

Marking Requirements

  •  Manufacturer’s name, brand, or trademark
  •  A53 A, A53 B
  •  Hydrostatic test pressure and/or NDE, or NH if neither is specified
  •  Size, length, weight per foot (NPS 4 and larger)
  •  ANSI schedule number or weight class or wall thickness
  •  Additional “S” if tested supplementary requirements
Products Related to ASTM A53 Grade B Carbon Steel Pipe

ASTM A53 Grade A, B Pipes in Australia

Material ASTM A53 Grade A, B Pipes
Steel Grade ASTM A53
Surface Treatment Matte
Type Steel Pipe
Shape Round
Get Best Quote Request A Callback

ASTM A53 Grade B Pipe in Australia

Size 3 Inch
Unit Length 3m, 6m, 12m
Surface Finish Finished Polished, Mill Finished
Standard ASTM, BS, JIS
Shape Type Round, Square
Get Best Quote Request A Callback

ASTM A53 Grade B Carbon Steel Pipe in Australia

Size / Diameter 1.5 Inches
Product Type Carbon Steel Pipe
Material Carbon Steel
Thickness 20mm
Get Best Quote Request A Callback

Carbon Steel A53 GR.B ASTM ASME Pipes in Australia

Size 1/2 Inch
Steel Grade A 53 GR B
Type A 53 GR B
Thickness (mm) Customized
Get Best Quote Request A Callback

ASTM A53 Grade B Pipes in Australia

Size / Diameter 3 Inches
Steel Grade ASTM A240
Unit Pipe Length 6 Meter
Country Of Origin Made In India
Get Best Quote Request A Callback
You may also like

ASTM A106 Grade B Carbon Steel Pipe

Tricon Steel & Alloys in Australia excels as a provider of ASTM A106 Grade B Carbon Steel Pipes, offering a comprehensive range designed to meet diverse industrial needs. As one of the most reliable ASTM A106 Grade B Carbon Steel Pipe Manufacturers in Australia, we offer products that are available in different schedules, wall thickness, and diameters to suit a wide range of applications. Available in sizes ranging from 1/2” NB to 36” NB with thicknesses from 3 mm to 12 mm, these pipes in Australia are crafted using advanced manufacturing techniques such as cold rolling and cold drawing.

Get Best Quote Read More

ASTM A333 Grade 6 Carbon Steel Pipe

Tricon Steel & Alloys is the finest provider of ASTM A333 Grade 6 Carbon Steel Pipes, offering a wide range of sizes and specifications to meet diverse industrial requirements in Australia. Being premier ASTM A333 Grade 6 Carbon Steel Pipe Manufacturers in Australia, we offer pipes that are manufactured to meet the highest standards of quality and performance. Our pipes in Australia adhere to stringent standards, including ASTM, ASME, and API, ensuring reliability and performance.

Get Best Quote Read More

ASTM A671 Carbon Steel Pipe

Tricon Steel & Alloys is a leading provider of ASTM A671 Carbon Steel Pipes, designed in Australia to meet diverse industrial requirements with precision and reliability. As one of the finest ASTM A671 Carbon Steel Pipe Manufacturers in Australia, we are capable of providing the best quality products to our customers. Our pipes in Australia adhere to ASTM A671 / ASME SA671 specifications, available in sizes ranging from 2 inches to 24 inches in outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.

Get Best Quote Read More

ASTM A671 CC65/CC70 Carbon Steel Pipe

Tricon Steel & Alloys is a trusted provider in Australia of ASTM A671 CC65/CC70 Carbon Steel Pipes, adhering to ASTM A671 / ASME SA671 standards. As one of the finest ASTM A671 CC65/CC70 Carbon Steel Pipe Manufacturers in Australia, we ensure our pipes are available in a range of sizes from 2 inches to 24 inches outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.

Get Best Quote Read More

S275 JR Carbon Steel Pipe

Tricon Steel & Alloys proudly makes S275JR Carbon Steel Pipes to exacting standards, ensuring reliability and durability for diverse industrial applications in Australia. As reliable S275JR Carbon Steel Pipe Manufacturer in Australia, we are committed to providing the highest quality products. Our pipes in Australia conform to SAE/AISI 1008 (Si 0.03%) and are compliant with various international specifications, including EN 10219 -1- S275 J0H, EN 10219 -1- S355 MH, and EN 10025 -2- S275JR+AR.

Get Best Quote Read More

ASTM A210 GRADE A1 Carbon Steel Pipe

ASTM A210 Grade A1 Carbon Steel Seamless Pipes find extensive application in industries in Australia requiring high-quality, low and medium pressure boiler tubes. These pipes are designed in Australia to withstand elevated temperatures and pressures, making them ideal for use in boilers, heat exchangers, condensers, and similar applications. As one of the most prominent ASTM A210 Gr A1 Carbon Steel Seamless Pipes Suppliers in Australia, we deliver our products within the quickest turnaround time.

Get Best Quote Read More

IS 1239 Carbon Steel Pipe

Tricon Steel & Alloys stands as a premier manufacturer of IS 1239 Carbon Steel Pipes, meeting stringent industrial standards in Australia with precision and reliability. As reliable  IS 1239 Carbon Steel Pipe Manufacturers in Australia, we can offer a wide range of pipes in different sizes, thicknesses, and dimensions. Our pipes in Australia conform to the IS 1239 standard and are available in a wide range of sizes and thicknesses to cater to diverse application needs. We offer MS IS 1239 B Class Seamless Pipes ranging from 4mm to 219mm outer diameter (OD) with wall thicknesses from 0.5mm to 20mm in Australia.

Get Best Quote Read More

IS 3589 FE 410 Carbon Steel Pipe

At Tricon Steel & Alloys in Australia, we manufacture IS 3589 Fe 410 Carbon Steel Pipes to meet the demanding standards of various industrial applications. As one of the leading IS 3589 Fe 410 Carbon Steel Pipe Manufacturers in Australia, we manufacture these pipes using premium quality raw material sourced from trusted vendors. These pipes in Australia, available in sizes ranging from 15 Nominal Bore to 150 Nominal Bore, are built to ensure durability and performance.

Get Best Quote Read More
Get a Quote